Shipping Verification

This item is not available for shipping to and will not be added to your cart.
This item is available for shipping to and was added to your cart.

This item can only be delivered to select locations

Please enter your delivery zip code below to determine shipping eligibility:
Invalid zip code. Please enter a 5-digit US zip code. .

Product(s) Added

Add Product(s) to Favorites List

The product(s) has been added to {{ listName }}

Enter a new name for this list:

This is a required field. Invalid list name. Name may only contain letters, numbers and the characters : - _ or space.
My Location
You are delivering to
{{currentLocation}}

Nearest Branch:
{{ selectedBranch.Line1 }}
{{ selectedBranch.Line2 }}
{{ selectedBranch.City }}, {{ selectedBranch.State }} {{ selectedBranch.PostalCode }}
Cart
There are item(s) in your cart.
CHECKOUT View Cart
Most Recently Added:
No items

Best Practices for Cold Weather Concreting

The American Concrete Institute (ACI) defines cold weather concreting as "a period when the ambient temperature is below 40°F (5°C) for three days or more." The temperature is calculated as an average of the highest and lowest temperature from midnight to midnight. 

If the average temperature is above 40°F, or if it only drops below this temperature for short periods, you do not need to account for the cold weather when placing and curing concrete.

Understanding the definition of cold weather concreting helps you determine when to make adjustments to the process and when you can proceed as usual.


How Does Cold Weather Impact Concrete?

Low temperatures affect concrete in several ways. Once you know the challenges of cold weather concreting, you can take steps to account for them.

Formation of Ice Crystals

Ice crystals can form and stop the hydration process when concrete is placed in cold temperatures. This is a significant problem because, under ordinary circumstances, the creation of calcium silicate hydrate during hydration strengthens the concrete. If ice crystals slow the process before it reaches this crucial stage, the cured concrete can have reduced strength.

The effect of ice crystals is more pronounced during the first day of curing. If the concrete freezes in the first 24 hours after being placed, it can lose up to half its 28-day strength. In cold weather concreting, concrete cannot withstand a freeze cycle until it has reached a strength of at least 500 psi.


Increased Set Times

Concrete set times are longer when the temperature is low, so you must account for this situation when planning projects. 
Cold Weather Concreting - Ice on Concrete
Set times at 30°F can be up to twice as long as they are at 50°F. The heat-producing reaction that occurs when concrete cures is not enough to combat the effect of low temperatures on set times.



Cracking
Concrete placed on frozen ground can cause cracking. When the temperatures increase, the ground underneath the set concrete thaws and settles. If it shifts, it can create surface cracks. Placing concrete on frozen ground also means that the bottom layer sets slower than the top layer, leading to surface defects.

Ultimately, the concrete is not as strong and has more surface defects when placed in cold temperatures without the proper precautions.


What Are Best Practices for Cold Weather Concreting?

Best practices for cold weather concreting can help you achieve desired results.
Adjust Mix Design

Making some adjustments to the mix can offset the impact of the cold weather and ensure that concrete cures properly without surface defects.

  • Use Type III cement - Type III cement is finer, so it reacts faster, speeding up the hydration process and magnifying the early strength increases. Therefore, the strength losses from ice crystals can be somewhat counteracted.

  • Reduce supplementary cementitious materials (SCMs) - SCMs slow the setting time of concrete, so you should reduce them in the mix when placing concrete in cold weather. However, don't forget the importance of permeability and strength and how the SCMs impact those factors. Reducing SCMs too much could cause more damage than cold temperatures in some cases.
Adjust Mix Design
  • Use accelerating admixtures - Accelerating admixtures can speed up the drying process to counteract the impact of the weather. Calcium chloride, sodium nitrite, and calcium nitrite are all good options, but you shouldn't use calcium chloride in reinforced concrete. Bear in mind that accelerating admixtures do not prevent freezing. Additional precautions are essential in these situations.


Check Subgrade Temperature

Before placing concrete, check the subgrade temperature. If the subgrade is frozen, wait until it thaws and the temperature increases before moving forward.



Heat Materials

Heating your materials can help you counteract the low temperatures in cold weather concreting. In the right conditions, it is possible to achieve regular setting times and strength using this method. However, it would be best if you took other measures because the conditions need to be highly specific.

You can heat water to between 140°F and 180°F. In frigid temperatures (below 25°F), you can heat the aggregates to prevent ice and frozen lumps from forming, but you don't need to heat the aggregates to more than 60°F if you also heat the water.
It's not advisable to heat aggregates with boiling water as any residual water can impact the final mix. Instead, you can use circulating steam to heat aggregates to the required temperature.


Avoid De-Icers

All de-icing substances create an adverse reaction with freshly placed concrete and ruin the end product. If they come into contact with the concrete during setting, the de-icers cause flaking and scaling on the surface. Sometimes, sodium chloride and calcium chloride can be used on high-quality, dense concrete. However, it's best to avoid de-icers altogether because alternative methods are more than adequate.


Maintain Temperature While Setting

After placing the concrete, you must ensure it maintains the correct temperature while it sets. You can use heated enclosures and combustion heaters, but you need to keep the heaters well-vented to avoid directly heating the concrete. Enclosures should be weather and windproof to ensure a stable temperature for the entire setting period. Insulating blankets can also help create steady temperatures.


While the concrete sets, constant temperature monitoring is key to avoiding rapid fluctuations that may impact the hydration process and cause cracks. You can also place temperature sensors into the concrete and set them to send updates wirelessly.
The set times need to be extended based on the temperature. The following table gives you a general indication of set times in different temperatures:


Temperature Average setting time (hours)

20°F Concrete will not set
30°F 19
40°F  14
50°F  11
60°F  8
70°F  6
80°F  4
90°F 2-3
100°F  1-3

 
Once the curing process finishes, you must slowly remove the heated enclosures, blankets, and combustion heaters. Taking them away all at once causes rapid cooling, so start by turning the temperature off but leaving the enclosure up. Continue monitoring the temperature until it has stabilized and you can safely remove the enclosure.


Cold weather concreting can be challenging, but you can achieve good results by following this important advice.



Why White Cap?

White Cap® can help you with cold weather concreting and any additional admixtures you may need.


Our experienced Account Managers can offer tailored solutions and professional advice on the job site or in your office. With an average of 12 years of industry experience, our team is truly the most knowledgeable pros in construction supplies.

Request a Quote
Discover better prices and location specific benefits